Manual

Mainfunctions •Activate and deactivate •Adjusting sensitivity •Select bell sound •One-key find vehicle •SOS function •low Battery indication Remote Control •Activatekey(thefirstkey) •Deactivatekey(thesecond) •Ringtonekey(thethird) •Programkey(theforth) Activatekey:Press it once,host alarm will go into"activated mode".Alarm will be triggered and start to ring if vibration or movement is detected. Deactivate key: Under"activated mode",press this key,alarm will drop out"activated mode"and return to"standby mode". When alarm is triggered and ringing,press this key once,the alarm sound will stop right now. Ringt one key: Under any mode or condition,Press this key,alarm will ring right now.Inaddition,there are 6 kinds of ringtone are available. Program key:This key is useful when you...

Z07 wireless security alarm----vibration sensor Electronic Specification 1. Power supply of the host: 2*AAA battery 2. Power supply of the controller:1* 12V/27A battery 3. Standby time of the host: >1 year(5 times switch on/off per day) 4. Standby time of the controller:>1 year(5 times of control per day) 5. Operating Temperature: -10℃~60℃ 6. Operating Humidity:<80% 7. Storage temperature:-20℃~70℃ Function Introduction Installation 1. Battery installation of controller: Use cross screw driver to take off the controller’s cover and then put in one 12V/27A alkaline battery. Please replace a new battery when LED light becomes dark or it will shorten the control...